MTX Audio TA8502 Manuel d'utilisateur télécharger pdf

TA8502 Owner’s Manual

Introduction

Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX ampliﬁ ers and

matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to

hear, feel, and experience all of the music the artist intended.

Speciﬁ cations

Primary Ratings:

Power Output: 125 watts RMS x 2-channels at 4 ohm and

≤

1% THD+N

Signal-to-Noise Ratio (1 watt): 74dB

Secondary Ratings:

Power Output: 250 watts RMS x 2-channels at 2 ohm and

≤

1% THD+N

Power Output: 375 watts RMS x 2-channels at 1 ohm and

≤

1% THD+N

Power Output: 500 watts RMS x 1 bridged at 4 ohm and

≤

1% THD+N

Power Output: 750 watts RMS x 1 bridged at 2 ohm and

≤

1% THD+N

THD+Noise (Distortion) (1 watt):

≤

.1%

Frequency Response (-3dB): 20Hz-20kHz

Maximum Input Signal: 10V

Maximum Sensitivity: 100mV

Dimensions: 9-5/8” x 20-11/16” x 2-1/2” (245mm x 525mm x 65mm)

Smart Engage™ Auto-Turn-On (Patent No: US06556683)

Patented Pure N-Channel Technology (Patent No: US05631608, US05783970)

Patented Power Supply (US05598325)

Input Sensitivity Switch: 100mV-1V/1V-10V

Crossover: Hi, 12dB / Low, 24dB Mono @ 40Hz-350Hz, Defeat

Subsonic @ 30Hz, 12dB/oct, Defeat

Parametric EQ: Boost/Cut +/-12dB, Freq. 30Hz-80Hz, Q 0.5-4.0

ARC: Cut 0-15dB, Freq. 200Hz

Remote Subwoofer Level Control

Features

1. Prizm EFX – All MTX ampliﬁ ers include backlit adjustment controls on the top surface of the product.

• Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, and BLUE to any color

in between.

• EFX – You can switch Prizm EFX lighting to “pulsate” with the beat of the music.

2. Xtant Technology Cooling (XTC) – A thermal-regulated turbo-charged intercooler supplies fan forced cool air

evenly and constantly through tightly packed bonded ﬁ ns. Fan speed is continuously variable and controlled

by the ampliﬁ er’s output, temperature of the heatsink, and transformers. Exhaust from the internal heatsink is

strategically positioned to cool the transformers to maintain maximum performance at all volumes.

3. Bi-Level Inputs with Smart Engage™ – All MTX ampliﬁ ers feature RCA type input connections. All MTX

ampliﬁ ers allow both high level and line level input into the RCA type input connections.

• Low Level Input – Source units with an output signal level of 100mV–10V may be used. See “Input

Sensitivity” for proper voltage level setting.

• High Level Inputs with Smart Engage™ – All MTX ampliﬁ ers allow high level inputs through RCA type input

connections using provided high level adapters. Source units with an output signal level of 100mV–10V may

be used. See “Input Sensitivity” for proper voltage level setting.

• Smart-Engage™ Auto-Turn-On - An auto-turn-on circuit is included within the ampliﬁ er. A remote turn-on

wire is not necessary when connecting the ampliﬁ er’s high-level input to a high-powered source unit (car

stereo). The ampliﬁ er will automatically turn on when music is received through this type of connection.

Note: Smart Engage™ is only active on the left input.

1 2 3 4 5 6

Résumé du contenu

Page 1 - Speciﬁ cations

TA8502 Owner’s ManualIntroductionThank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX ampliﬁ ers and matching MTX

Page 2 - Before Starting

4. Input Sensitivity – The Input Sensitivity switch is used to set the proper input voltage range:X1 POSITION: 100mV–1V (Typically for RCA Input)X10

Page 3 - Connections

InstallationMountingPlace your Thunder ampliﬁ er at the predetermined mounting location. Use a felt pen to mark the exact position of the mounting hol

Page 4 - Feature Setup and Adjustments

• GND: This is the ground connection for the ampliﬁ er and must be connected directly to the metal chassis of the vehicle for the ampliﬁ er to opera

Page 5

3. Adjusting the Hi, 12dB / Low, 24dB Mono @ 40Hz–350Hz Variable X-over Frequency Controls – • Setting for Subwoofers: First enable the electronic

Page 6 - Trouble Shooting

7. Remote Subwoofer Level Control (Remote Gain) – Let’s say the ampliﬁ er’s gain is set at halfway. When the remote subwoofer level control is plugge

Commentaires sur ces manuels

Pas de commentaire

MTX Audio TA8502 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Égalisateurs audio MTX Audio TA8502. MTX Audio TA8502 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Égalisateurs audio MTX Audio TA8502